ADOT Roadside Comm Equipment

Status: Existing

Description

ADOT roadside communications equipment includes ALL field equipment that communicates information from the roadside to travelers and, from the roadside to the roadside. It includes travel times, truck escape ramps, vehicle speed feedback signs, wrong way detection, signals to support the SPaT system and, other ITS field equipment that supports TM08 for traffic incident management.

Stakeholders

StakeholderRoleRole Status
ADOTOwnsExisting
ADOTOperatesExisting

Physical Objects

ITS Roadway Equipment
Wayside Equipment

Functional Objects

Functional ObjectDescriptionUser Defined
Roadway Automated Treatment'Roadway Automated Treatment' automatically treats a roadway section based on environmental or atmospheric conditions or under center control. Treatments include fog dispersion, anti–icing chemicals, etc. It communicates with the center and environmental sensors to support system activation and optionally with sign(s) that warn the driver in adverse conditions when the system is activated.False
Roadway Barrier System Control'Roadway Barrier System Control' includes the field equipment that controls barrier systems used to control access to transportation facilities and infrastructure. Barrier systems include automatic or remotely controlled gates, barriers and other access control systems.False
Roadway Basic Surveillance'Roadway Basic Surveillance' monitors traffic conditions using fixed equipment such as loop detectors and CCTV cameras.False
Roadway Data Collection'Roadway Data Collection' collects traffic, road, and environmental conditions information for use in transportation planning, research, and other off–line applications where data quality and completeness take precedence over real–time performance. It includes the sensors, supporting roadside infrastructure, and communications equipment that collects and transfers information to a center for archival.False
Roadway Environmental Monitoring'Roadway Environmental Monitoring' measures environmental conditions and communicates the collected information back to a center where it can be monitored and analyzed or to other field devices to support communications to vehicles. A broad array of weather and road surface information may be collected. Weather conditions that may be measured include temperature, wind, humidity, precipitation, and visibility. Surface and sub–surface sensors can measure road surface temperature, moisture, icing, salinity, and other metrics.False
Roadway Field Device Support'Roadway Field Device Support' monitors the operational status of field devices and detects and reports fault conditions. Consolidated operational status (device status, configuration, and fault information) are reported for resolution and repair. A local interface is provided to field personnel for local monitoring and diagnostics, supporting field maintenance, upgrade, repair, and replacement of field devices.False
Roadway Field Management Station Operation'Roadway Field Management Station Operation' supports direct communications between field management stations and the local field equipment under their control.False
Roadway Incident Detection'Roadway Incident Detection' provides incident detection using traffic detectors and surveillance equipment. It monitors for unusual traffic conditions that may indicate an incident or processes surveillance images, watching for potential incidents. It provides potential incident information as well as traffic flow and images to the center for processing and presentation to traffic operations personnel.False
Roadway Lighting System Control'Roadway Lighting System Control' includes field equipment that controls lighting systems for transportation facilities and infrastructure. It includes the sensors, lighting controllers, and supporting field equipment that monitors and controls lighting systems. The equipment supports control based on sensed local conditions, stored timing plans, and remote commands from a center. It monitors lighting system status and reports status to the controlling center.False
Roadway Reversible Lanes'Roadway Reversible Lanes' includes field elements that monitor and control reversible lane facilities. It includes the traffic sensors, surveillance equipment, lane control signals, physical lane access controls, and other field elements that manage traffic on these facilities. It provides current reversible lane facility status information and accepts requests and control commands from the controlling center.False
Roadway Safeguard System Control'Roadway Safeguard System Control' includes field equipment that controls safeguard systems for transportation facilities and infrastructure. Safeguard systems include blast shields, exhaust systems and other automatic or remotely controlled systems intended to mitigate the impact of an incident.False
Roadway Signal Control'Roadway Signal Control' includes the field elements that monitor and control signalized intersections. It includes the traffic signal controllers, detectors, conflict monitors, signal heads, and other ancillary equipment that supports traffic signal control. It also includes field masters, and equipment that supports communications with a central monitoring and/or control system, as applicable. The communications link supports upload and download of signal timings and other parameters and reporting of current intersection status. It represents the field equipment used in all levels of traffic signal control from basic actuated systems that operate on fixed timing plans through adaptive systems. It also supports all signalized intersection configurations, including those that accommodate pedestrians. In advanced, future implementations, environmental data may be monitored and used to support dilemma zone processing and other aspects of signal control that are sensitive to local environmental conditions.False
Roadway Standard Rail Crossing'Roadway Standard Rail Crossing' manages highway traffic at highway–rail intersections (HRIs) where operational requirements do not dictate advanced features (e.g., where rail operational speeds are less than 80 miles per hour). Either passive (e.g., the crossbuck sign) or active warning systems (e.g., flashing lights and gates) are supported depending on the specific requirements for each intersection. These traditional HRI warning systems may also be augmented with other standard traffic management devices. The warning systems are activated on notification of an approaching train by interfaced wayside equipment. The equipment at the HRI may also be interconnected with adjacent signalized intersections so that local control can be adapted to highway–rail intersection activities. Health monitoring of the HRI equipment and interfaces is performed; detected abnormalities are reported through interfaces to the wayside interface equipment and the Traffic Management Center.False
Roadway Traffic Information Dissemination'Roadway Traffic Information Dissemination' includes field elements that provide information to drivers, including dynamic message signs and highway advisory radios.False
Roadway Variable Speed Limits'Roadway Variable Speed Limits' includes the field equipment, physical overhead lane signs and associated control electronics that are used to manage and control variable speed limits systems. This equipment monitors traffic and environmental conditions along the roadway. The system can be centrally monitored and controlled by a Traffic Management Center or it can be autonomous, calculating and setting suitable speed limits, usually by lane. This application displays the speed limits and additional information such as basic safety rules and current traffic information to drivers.False
Roadway Warning'Roadway Warning' includes the field equipment used to warn drivers approaching hazards on a roadway. Warnings may be generated in response to roadway weather conditions, road surface conditions, traffic conditions including queues, obstacles or animals in the roadway, and any other transient events that can be sensed. The equipment monitors traffic and roadway conditions and may send data to a Traffic Management Center for processing or may process it to determine when a warning should be issued. When it is determined that a warning should be issued, the equipment is used to alert approaching drivers via dynamic warning signs, flashing lights, in–vehicle messages, etc.False
Roadway Work Zone Safety'Roadway Work Zone Safety' includes field elements that detect vehicle intrusions in work zones and warns crew workers and drivers of imminent encroachment. Crew movements are also monitored so that the crew can be warned of movement beyond the designated safe zone.False

Physical Standards

Document NumberTitleDescription
ITE ATC 5201Advanced Transportation ControllerThis standard defines the functionality and performance requirements for a modern ITS controller known as an ATC. It is similar to the NEMA TS–2 standard in that it defines basic capabilities but leaves hardware choices up to the manufacturer.
ITE ATC 5202Model 2070 Controller StandardThis standard specifies the hardware for a modern, open–architecture controller for ITS applications that can run Linux and is capable of executing advanced signal controller logic, among other things.
ITE ATC 5301Intelligent Transportation System Standard Specification for Roadside CabinetsThis standard specifies the characteristics of a modern controller cabinet for the ITS industry.
ITE ATC 5401Application Programming Interface Standard for the Advanced Transportation ControllerThis standard defines the application programmers' interface (API) that should be supported by an ATC, which is an open–architecture controller that can host multiple ITS applications.
NEMA TS 8Cyber and Physical Security for Intelligent Transportation SystemsThis specification describes how agencies and other transportation infrastructure owner/operators should implement cyber– and physical–security for ITS.
NEMA TS2Traffic Controller Assemblies with NTCIP RequirementsThis specification covers traffic signaling equipment used to facilitate and expedite the safe movement of pedestrians and vehicular traffic.
NEMA TS4Hardware Standards for Dynamic Message Signs (DMS) With NTCIP RequirementsThis standard provides hardware specifications for safe, dependable, functional, and easily maintained Dynamic Message Sign (DMS) equipment.

Interfaces To

(View Context Diagram)

ADOT CV Roadside Equipment
ADOT DUST Detection System
ADOT Engineering Districts
ADOT Incident Response Unit (IRU)
ADOT ITS Field Equipment
ADOT Mainline Detection
ADOT Maintenance Work Zone Field Equipment
ADOT RWIS
ADOT Service Monitor System for Connected Vehicle
ADOT Systems Maintenance
ADOT TOC and EMC
ADOT TOC Data Archive
ADOT Truck Parking Availability System (TPAS)
ADOT Wrong Way Driver Detection System
Basic Private Vehicle
DPS Central Communications Center
NDOT ITS Field Equipment
NOAA _National Weather Service
Rail Grade Wayside Warning Systems
Tribal TMC–TOC–TIC